The Colt 1911 Combat Elite Returns

Arms and ammunitions are very significant part of protection. The quality and the functionality of the guns must be suitable enough to be used correctly. There are different kinds of models that are found but possessing them is not allowed without proper license.

The Colt 1911Combat Elite is provided with several favorable characteristics that all the gunmen will definitely love to use. Colt again made the reappearance of the Combat Elite. They declared the re-emergence of the Combat Elite at the famous 2009 SHOT Show. The piece that was placed at the show was very well preferred by many. The trial model had no superficial imperfection that was found to some extent in the Delta Elite on the same event.

The ’09 Colt directory now enlists the Combat Elite. The model of the pistol is very good looking. It gives the feel of the platform of 1911. The considerable part is that the gun has been chambered in the esteemed .45 ACP. But no perfect price has been attached to the Combat Elite that has been displayed. Some Colt representative reportedly said something like $1000. But probably this price will change. The slide is made from carbon steel.  The barrel is of national match. The two shaded polish gives a great outlook. The model has 8+1 competence. The trigger has three gaps and is skeletonzised. The frame is from stainless steel.

There is solitary side and this is very helpful for the safety to the thumb. Serration for the slides is very well present at the frontage in addition to the back. This recent Combat of 1911 produced by Colt is really praiseworthy. Any stern shooter must be clearly pleased by the gun. Also those who like to collect the various models will also like the gun in their stock. The latest model from Colt has got various gun dealers to sell the gun. As said the design is really stunning with many useful parts. The slide has secure tolerance. The frame by means of conventional metal sleeve can efficiently make a note of two colors. All in this entire gun is a complete package with great striking configuration. Preventive knock has a stretched out slot.

The Novak back is worthy. The whole body has half checked design. The rest half has grips that are made from level rosewood. If you are wishing to buy the Colt Combat Elite 1911 you can visit ‘gunsamerica.com’ for further details. All these are the wide-ranging details of the Combat Elite from the great gun manufacturer of Colt. But visit the different sites in the internet for the enhanced details. There are many sites that give the details in the Combat Elite. Visit the

1911 forums for the detailed discussions on the Combat Elite. If you have missed the show then visit the sites for the enhanced pictures and price comparisons. Along with Combat Elite there are various other models that will make you pleased and you will definitely wish to posses them.

What is the best holster for your 1911 pistol?

A pistol holster is very important to a 1911 pistol owner and getting your hands a good holster is a good investment. Good holsters make sure that your pistol is safe, secure and also protects the pistol. If you are a owner of 1911, then one of the best holsters the Blackhawk SERPA 1911 holster .  These holsters will fit most any full size 1911 with or without a railed frame. It can also fit the full size KWA M945 and some compact 1911 pistols.

The 1911 SERPA holster and the Blackhawk SERPA holster are designed by the people who live and breathe shooting and understand the very importance of having a holster that is safe and quick in getting your sidearm out. The 1911 SERPA  holster is currently used by law enforcement officers and military personnel both in America and international countries.

With these holsters, owners of a 1911 pistol can be guaranteed that they will be able to draw and securely re-holster their pistol faster than normal old-fashioned holsters.

Old-fashioned holsters have one major big flaw- its clumsy retention straps. These straps always get in the way when you want to re-holster or draw your pistol. With the SERPA active retention system, pistol owners do not have to be worried about that since the SERPA series comes equipped with an active retention system that has a spring loaded catch which locks the pistol trigger guard as you holster it. The lock enables the pistol to be locked in securely and the pistol will not come out until the release button is pressed. No matter what you do, the pistol will not budge from is safety holster unless the release is pressed.

The release is located as the side of the holster, exactly at the position of where the trigger finger naturally comes to rest as you grab the pistols grip. This is an ingenious location for the release as it makes it easier for re-holstering your pistol without taking too much time. All you would need is one fluid motion of your sidearm when you want to draw your pistol.

The holsters are designed with durable carbon fiber and are molded to match the specific gun types it is designed for, such as the 1911 pistols. The holsters also come with a belt loop and a paddle platform as well as multiple-angle locks mechanism that can use either platform for a more comfortable cant.

The paddle platform is designed in such a way to enable it to slide overtop the waistline of your pants and has special claws to grip the material so the holster is held safely and securely. The belt loop platform can take up to a 2.25 inch belt and has locking adjustments to fit to smaller belts without unwanted play. This holster is a good investment for anyone that is looking to buy the best holsters for their 1911 pistols.

How to clean your 1911 pistol

Cleaning a 1911 pistol can be difficult but if you want to make sure that your gun looks squeaky clean then there are a few simple rules to follow. Knowing the best way to clean your 1911 pistols is the way to make sure you do it right. Different types of pistols have different cleaning methods, assembly as well as cleaning products to efficiently clean grime, dust and dirt from your pistol. A well kept and cleaned pistol ensures better performance of your pistol.

First you would need to take your pistol apart such as removing the 1911 pistol grips from the pistol. It is possible to clean the pistols without taking anything apart but by taking it apart, you can ensure a thorough clean. You can get inside and get into every nook and cranny of the pistol to clean it. Consistent cleaning of the pistol ensures that you prolong the life of your pistol and makes sure it doesn’t jam up or gets faulty.

When you are attempting to take off the pistol grips, all you need to do is to find the screw that holds the grips into place. Once this is done, you can easily remove the grips from the gun. If you are cleaning your pistol for the first time, make sure to take your time in taking the parts of and not rush into de-assembling as you might get the parts mixed up. Simply unscrew, being careful to not fracture or scratch the current grips, keeping them in perfect condition.

How to clean a 1911 pt 1

When cleaning you 1911 pistol, you can choose to use basic gun lube and wipes to clean them or you could use specific products catered to clean a 1911 pistol from its metal to the treated wood. It is up to your personal preferences to clean your pistol. When cleaning your pistol, it goes beyond cleaning and drying them. You would also need to provide protective coating by using some of the top lube products like Mil-tech for the 1911 pistol.

Invest in a good set of cleaning and lube supplies as well as pistol cleaning brushes. After cleaning your pistol, you should also keep the cleaning equipment clean for future use. After you are done cleaning the pistol, its time to put it all back together. Assembling the pistol together is as easy as taking them apart.

As mentioned before, do not rush in assembling the parts together. Line each separate piece carefully and start with fixing them together. Screw each part back in carefully. You should be careful when screwing the parts in, as you will want to make sure that you do not scratch the pistol grips as you are putting them back onto the pistol itself.

Some people will fail to understand why they need to clean their 1911 pistol. Some people have never cleaned their pistols which is a big no-no. The importance of pistol cleaning is numerous as it affects the performance of the pistol. Those who are serious about the look of the pistol will want to make sure that they clean the pistol frequently. Knowing the best way to clean the pistol is essential to doing it right the first time.

How to clean a 1911 pt 2

History of the 1911 pistol

The 1911 semi-automatic pistol was designed by John M. Browning for the US armed forces from 1911 to 1985. This gun was popular during the World War I, World War II, the Vietnam War and the Korean War.  The 1911 pistol

was designed to replace .38 revolvers which were not suitable to stop attackers during one of its war campaign against the Moros in Philippines.  The creation for this gun started after the Ordinance Board concluded they need a .45” caliber cartridge for a better stopping power.

J. Browning re-engineered the design of an autoloader pistol that has a .38 cartridge to suit the .45” diameter cartridge with the 230gr. FMJ bullet and submitted his design for evaluation after the Army officially announced their interest for a new handgun.  There were a few firearms submitted for evaluation and the 1911 was selected after the Ordinance Department prepared a series of further tests.

Browning even went to Hartford so that he can supervise the gun’s production personally. He cooperated with Fred Moore to make sure every part used for test gun was perfect.  Torture test was conducted on 3rd March, 1911 after the guns were submitted again for evaluation. One of the tests requires each gun to fire 6000 rounds. The pistol would be allowed to cool for 5 minutes after every 100 rounds. The pistol were cleaned and oiled after every 1000 rounds.

After the initial 6000 rounds, they tested it with deformed cartridges. And then the gun were submerged in sand and mud or rusted in acid to test its durability.  The pistols designed by Browning passed the test series excellently. In fact, it was the first firearm to go through a test firing 6000 cartridges continuously. The record was only broken in 1917 after another of Browning’s invention; the recoil operated machine gun went through a 40000 rounds test.

The .45 Automatic pistols were named as model 1911 and were chosen as the official sidearm for the Armed Forces of USA on 29th March, 1911.  This gun model was the most popular design done by John Browning. The short recoil principle system became popular during the 20th century almost all modern centerfire pistols that we have today are designed according to 1911.

The pistols that we have today look similar to the original 1911 model. The only obvious difference was the missing crescent-shaped cuts at the back of the trigger for contemporary pistols.  There were some slight changes being made to the Colt Model 1911 in early 1920 to improve the gun. The changes include replacement of the flat mainspring with an arched one, short trigger was made standard, the grip safety were made longer. This model was named as the 1911 A1 Government Model. Another 1911 model was created in 1929 based on the .38 Super cartridge.

A .22 LR version was produced in 1931 and named as Colt Ace. There were about 2.7 million units of the 1911 pistol were procured in the United States during its service life.

How to disassemble your 1911 pistol

The article below will explain how to disassemble your 1911 pistol for routine maintenance purpose. This type of pistol is actually quite simple and you don’t need too much tools for the process.

Make sure you always check if the gun is empty before you start taking the pistol apart as a safety precaution.

You can check by removing the magazine, pull the slide back and then lock it in the open position. The barrel’s chamber should be empty.

You should release the slide manually and wait for it to slide forward. Press the recoil spring plug inwards and the barrel bushing will be free to be twisted clockwise. The recoil spring plug will be uncovered completely. The recoil spring is under strong pressure so you must keep it pressed while twisting the bushing to avoid it from flying away.

After that, you should remove the recoil spring plug and spring. Make sure to cock the pistol’s hammer to its full-cock position. Do not cock the hammer to half-cock position because you would be in a dangerous situation. Pull the slide until the slide release lever end is aligned with the circular notch.

The axis of slide release lever should be pushed towards the left side of the gun. And then just pull the lever completely from the gun frame to remove the recoil spring guide.

After that, you can twist the barrel bushing anticlockwise to pull it away. The barrel link should be moved forward towards the muzzle, and then you can remove it from the slide’s front opening.

We can continue and remove the remaining items that are still on the slide. This next instruction will be different depending on the gun model that you’re using.

You can push the Firing Pin Lock Plunger up and inwards with a punch if your gun has the Colt Series 80 safety. After that you can release the Firing Pin Lock Plunger and the Firing Pin will stay inside its opening. For guns without the Firing Pin Locking mechanism, you can just push the firing pin using a punch within its opening.

Pull down the Firing Pin Stop using punch to remove it. Use your thumb to cover the Firing Pin and you can press Firing Pin Lock Plunger to release it.

The pressure from the Firing Pin Spring will allow the Firing Pin to move back. Remove both of them.

Later on you should push the Firing Pin Lock Plunger inwards and pull the extractor backwards. Make sure you pull strongly to remove the Firing Pin Lock Plunger from the slide’s bottom.

And then you can remove the extractor completely.

The next step, you should grab the hammer with your left hand and release the trigger. Release it slowly to avoid the hammer from falling forward. That might destroy your gun.

Next, we should remove the mainspring house and press the grip safety until you remove the thumb safety.

You will need to use punch and hammer to take out the Mainspring Housing Pin. Don’t use too much force because you might lose the pin if it flies out of the housing.

Safety Lock can not be removed when the hammer is uncocked. You need to hold the grip safety and cock the hammer to move the Safety Lock upwards. Make sure you pull it out of the frame in the same time.

The Grip Safety can be removed after you remove the Safety Lock.

Next, the 3-prong Sear Spring at the grip’s bottom can be removed by lifting the hammer strut first.

To remove the Hammer, you will need to push the Hammer Pin to the right. Just push the pin gently.

Now you will have to push the Sear Pin to the left side of the frame to remove it.

This will enable the Sear and Disconnector to be removed. You will have to turn the pistol upside down so that the parts will fall into your palm.

After that you can remove the Magazine Catch Assembly with the prongs from the Sear Springs.

You need to push the Mag Catch Assembly and turn the small screw about 90 degrees counterclockwise.

The spring will lose its tension and you can remove it by pushing the Assembly to the right side.

You can remove the Trigger by pushing it from the back of the gun.

Pull the Safety Lock Plunger slowly to get the Plunger Spring and the Slide Release Plunger away from the Plunger tube.

Finally, get a screwdriver to unscrew the 4 stock screws on your gun. Make sure you use the right size to avoid scratching the surface of your screws. You might need to use plyers to hold the bushing and unscrew the stock screws.

Do not remove the plunger tube and ejector from the frame. This completes the whole process of disassembling your 1911 pistol.

Custom 1911 Grips

Find a wide variety of custom 1911  grip listings. New and used 1911 custom grips for sale at cheap discounted prices. Our listings are updated daily, check back often!

Colt 1911 Grips

Find a wide variety of 1911 colt grips listings. New and used Colt 1911 grips for sale at cheap discounted prices. Premium Colt 1911 pistol grips at discount prices.

How to Clean 1911 Pistol Grips

Pistol grips are one of the most underrated and important parts of the pistol. Pistol grips allow you to hold on to the pistol in a way that it is incredibly comfortable. Obviously these grips are not made out of the same material that is used for the rest of the gun. Trying to clean the 1911 grips can be difficult, but is often necessary for those who want to make sure that their gun looks as clean as possible. Knowing the best way to clean the grips is the best way to make sure that you do it right.

Taking it Apart

The first thing that you need to do revolves around taking off the 1911 pistol grips from the pistol itself. While it is possible to clean them while they are still on the pistol, the best way to do it is to actually take the grips off of the gun. This allows you to get inside, and every surface, clean. By taking them off, you make it easier to do what you need to do.

If you are trying to take off the pistol grips, you simply need to find the screw that holds the grips into place. When you find this screw, you can easily remove the grips from the gun. Simply unscrew, being careful to not fracture or scratch the current grips, keeping them in perfect condition.

Cleaning the 1911 Pistol Grips

Cleaning the 1911 pistol grips could not be easier. Some people like to simply take the approach of soap and water to clean them. Others will go out and purchase specific products that are meant to clean treated wood. Either will work fine; it is up to your personal preference as to how you take care of the grips. Simply clean them, and dry them. If you would like, you can add more protective coating, and can add wax to protect the grips further.

Putting it Back Together

Putting the 1911 pistol grips back together is nearly as easy as taking them apart. You must be careful to line them up correctly. Once you do so, you can simply screw them back in. Be sure to be careful, as you will want to make sure that you do not scratch the pistol grips as you are putting them back onto the pistol itself.

Some people will fail to understand why they need to clean their 1911 pistol grips. Others will simply never clean their grips. Those who are serious about the performance of the pistol, and those who are serious about the look of the pistol will want to make sure that they clean the grips. Knowing the best way to clean the grips is essential to doing it right the first time. This efficiency should not be underestimated, as doing it wrong can lead to issues with the pistol itself.

All About The 1911 Pistol Grips

All About 1911 Pistol Grips

1911 Pistol grips are an incredibly important part of the pistol. The 1911 pistol grips are important for more than just the actual pistol itself; some people change them because of their use. Others will change them because of their wear and tear, while others will change them for a different look. There are multiple aspects to pistol grips that many people simply do not think about. By learning all about  grips, you can be sure that you know what you need to before messing around with, or tinkering with, your 1911  grips.

Changing the 1911 Pistol Grips

Many people who own pistols do not realize that they can change the pistol grips on the gun itself. They do not realize that they can fully customize and change their pistol grips. Some people feel as though they need a new pistol if something happens to the pistol grips. These pistol grips can actually be removed and changed; any damaged pistol grips can be changed out in favor of new grips. These grips can be changed easily, and can actually be done at home in little time.

The Look of 1911 Pistol Grips

A lot of people fail to think of the look of their pistol. When they think of 1911 pistol grips, they tend to forget about all of the important aspects that a pistol grip can bring. Yes, these pistol grips help to hold the gun and give it a more comfortable feel. The pistol grips also help to make the gun look good. While this may not be important for someone who is worried about how the gun reacts, and how the gun shoots, it is important to those who have a collection. Those who have a collection of guns will want to have them look their best; the ability to customize their grips is key.

The Possibilities of 1911 Pistol Grips

1911 Pistol grips can come in multiple shapes and sizes. While people realize that they can purchase the grips that they are looking for, they often forget about the fact that they can make their own 1911 pistol grips. This is one of the great things about pistol grips; the ability to make your own, to customize them, and to make them your own. It brings a different look and feel to the gun, allowing people to customize the look and feel.

A lot of people fail to realize the fact that they can actually change the 1911 pistol grips for whatever pistols they own. They do not realize that it is something that is somewhat simple, and can be done from the comfort of their own home. Pistol grips are obviously an important part of the pistol. While some people will never think of the 1911 pistol grips, and will never have to think about them, they are always something that will be used by every single person who uses a pistol.

About

E1911grips.com is dedicated to bringing you news, deals, and information on the 1911 pistol and 1911 grips.